|
|
10920 - Oil Filter Crusher |
Reduces filter size by 75% and removes over 95% of residual oil. Crushes forklift, automotive and truck oil filters in seconds. Shop or van air operates hydraulic pump and can be set up anywhere. Compact size takes less than four sq. feet of floor space. Heavy duty aluminum frame cabinet surrounds the high pressure hydraulic hose for added safety and shields components from damage. Unitized construction allows for easy maintenance. Easy to operate; load the filter and close the door to activate the crushing cycle. Operates unattended; safety switch prevents operation when door is open. Specially designed door channel prevents drips and leakage, keeping oil in the chamber and not on the floor.
Specifications:
Height: 28-1/2"
Width: 12-3/4"
Depth: 12-3/4"
Maximum Filter Height: 7-1/2"
Filter Diameter: 6"
Crushing Force: 10 tons
Weight: 100 lbs.
Pump Type: Air Hydraulic |
|
|
|
10920 |
Oil Filter Crusher |
$1,150.00 |
Add
|
|
30100 - Save-A-Stud Rethreader |
| Solves the problem of removing and replacing damaged wheel studs. Today's complex disc brake, four wheel drive and front wheel drive vehicles make replacing damaged wheel studs a costly job which frequently must be absorbed. If the rotor becomes bent or warped during stud replacement, then it must be turned; if you turn one rotor the other should be done also. Damaged studs can be renewed in minutes without removing the caliper, rotor or stud. Every tire dealer needs one. Lifetime guarantee. See price sheet for individual sizes. Model 30300 kit available in metric. |
|
|
|
30100 |
Rethread Kit, Save-A-Stud, Passenger |
$115.00 |
|
|
Indiv. Dies Per Half (7/16", 1/2", 9/16", 5/8", 12mm 1.25, 12mm 1.5, 14mm 1.5, 1/2" SAE Left) |
$14.00 |
|
|
30120 - SAV-A-STUD Rethreader |
The best way to fix damaged threads. a 30-second solution to an hour-long job. Repairs wheel studs, spindles and standard threaded studs. Damaged studs can be renewed in minutes without removing the caliper, rotor or stud. The reusable wrap-around thread chasers restore thread to a like-new condition. Every tire dealer needs one. Lifetime guarantee. Unit comes complete in a plastic carrying case.
30120: 7/16" x 20; 1/2" x 20; 9/16" x 18; 5/8" x 18; 12mm x 1.25; 12mm x 1.50; 12mm x 1.75; 14mm x 1.50 |
|
|
|
30120 |
Save-A-Stud Plus |
$115.00 |
|
|
30125 SAV-A-STUD
|
Restore, Don't Replace:
The best way to fix damaged, rusted or painted threads on wheel studs, wheel spindles and standard threaded studs in seconds.
Made for right or left hand wheel studs.
Unit comes complete in a plastic carrying case and holds a lifetime guarantee. |
|
|
|
30125 |
Save-A-Stud Plus H/D ( 3 Peice Set ) |
$66.00 |
|
30130 |
Save-A-Stud Plus H/D ( 2 Peice Set ) |
$40.00 |
|
|
30135 - Spindle Saver |
| Don't replace the spindle; repair the threads. Used for the repair of damaged drive spindle threads. May be used on most domestic and import cars and light duty trucks. Fast and easy to use. See price sheet for individual sizes. |
|
|
|
30135 |
Spindle Saver |
$315.00 |
|