|
|
10100 - Giant Tire / Earth Mover Bead Breaker |
| Use on 5-piece rims 25" to 51" with pry bar/bead loosening pockets.4-1/4" stroke, 13.8-ton ram will break the toughest beads. Same as IMT-1800. 10207 kit contains 10100 bead breaker, 10500 pump and 10604 hose assembly. 10209 kit contains 10100 bead breaker, 10592 pump and 10604 hose assembly. Use with any air/hydraulic pump. |
|
|
|
10100 |
Bead Breaker Head, Giant Tire |
$570.00 |
Add
|
10204 |
Bead Breaker Kit, Giant Tire (contains 10100, 10508) |
$820.00 |
|
10207 |
Bead Breaker Kit, Giant Tire (contains 10100, 10500) |
$1055.00 |
|
10208 |
Bead Breaker Kit, Giant Tire (contains 10100, 10590) |
$1000.00 |
|
10209 |
Bead Breaker Kit, Giant Tire (contains 10100, 10592) |
$1020.00 |
|
|
10101 - "Combi" Bead Breaker |
| Works on all single, two- and three-piece truck tires/rims, including new style wheels. Breaks beads in seconds using 10,000 lbs. of force. The "Combi" Bead Breaker will not work on five-piece earth mover/giant wheel/rim - Model 10100 or 10105 required. Similar to IMT-210 but has patented side straps which allow tool to be used on newer high-flanged wheels. The 10200 kit contains 10101 bead breaker, 10500 pump and 10604 hose assembly. The 10202 kit contains 10101 bead breaker, 10592 pump and 10604 hose assembly. |
|
|
|
10101 |
Bead Breaker Head, "Combi" w/ Conversion Kit |
$682.00 |
|
10200 |
Bead Breaker Kit, "Combi" (contains 10101, 10500) |
$1150.00 |
|
10201 |
Bead Breaker Kit, "Combi" (contains 10101, 10590) |
$1100.00 |
|
10202 |
Bead Breaker Kit, "Combi" (contains 10101, 10592) |
$1120.00 |
|
|
10102 - "Maxi" Bead Breaker |
| Newly redesigned bead breaker, works on ALL 3 piece wheels that replace older 5 piece wheels. Designed to work on front or back of wheel with no attachments or accessories. Unit clamps easily to wheel – no setup time. Patent pending. |
|
|
|
|
10102 |
Bead Breaker Head, MAXI |
$955.00 |
|
|
10103 - Giant Tire / Earth Mover Bead Breaker |
| Use on all 39", 45", 51" and 63" wheel sizes. In most cases, you must first use model 10105 or 10100 bead breaker to start the movement of the rim flange. The 10103 can then be used. Model 10594 or 10504 air/hydraulic pump recommended for operation. Replaces Goodyear TO-2000-HA. 10211 kit contains 10103 bead breaker, 10504 pump and 10602 hose assembly. 10210 kit contains 10101 bead breaker, 10594 pump and 10602 hose assembly. |
|
|
|
10103 |
Bead Breaker Head, Giant Tire |
$1,440.00 |
|
10210 |
Bead Breaker Kit, Giant Tire (contains 10103, 10594) |
$1880.00 |
|
10211 |
Bead Breaker Kit, Giant Tire (contains 10103, 10504) |
$1890.00 |
|
|
10104 - Giant Tire / Earth Mover Bead Breaker |
| Use on 5-piece rims 25" - 51" without pry bar/bead loosening pockets. Replaces Goodyear TO-100-HA. 10212 kit contains 10104 bead breaker, 10508 hand pump and 10604 hose assembly. |
|
|
|
10104 |
Bead Breaker Head, Giant Tire |
$1,640.00 |
|
10212 |
Bead Breaker Kit, Giant Tire (contains 10104, 10508) |
$1820.00 |
|
|
10105 - Earth Mover Tire Bead Breaker |
| Use on smaller 25" and 29" earth mover tires/wheels. 2-1/8" stroke, 10-ton ram easily breaks most beads. Replaces Goodyear TO-1600-HA. 10205 kit contains 10105 bead breaker, 10500 pump and 10604 hose assembly. 10213 kits contains 10105 bead breaker, 10508 pump and 10604 hose assembly. |
|
|
|
10105 |
Bead Breaker Head, Giant Tire |
$680.00 |
|
10205 |
Bead Breaker Kit, Giant Tire (contains 10105, 10500) |
$1155.00 |
|
10206 |
Bead Breaker Kit, Giant Tire (contains 10105, 10590) |
$1100.00 |
|
10213 |
Bead Breaker Kit, Giant Tire (contains 10105, 10508) |
$935.00 |
|
|
10106 - Dual Agricultural/Tractor Tire Bead Breaker |
| Heavy duty 10-ton force breaks the toughest beads. Breaks inside head on outside dual farm tractor tires. Requires just 3" of operating space between dual tractor tires. No need to remove outside wheel to change tire on outside dual. Use with 10,000 psi air/hydraulic pump. |
|
|
|
10106 |
Bead Breaker, Dual Agricultural Tractor Tire |
$550.00
|
|
10107 |
Euro Bead Breaker |
$1,730.00
|
|
|
10108 - Bead Push Off Tool |
| Lightweight tool for removing combine and tractor tires after breaking the bead. Has a pushing force of 8,000 lbs. and a 5.5" stroke, a removable handle for compact storage and uses hydraulic pressure to force the tire off the rim. The push off tool hooks between the rim and the tire bead. Same as IMT-150. |
|
|
|
10108 |
Bead Push Off Tool |
$220.00 |
|
|
10109 - Talon Bead Breaker |
OTR Bead Breaker for heavy duty 3 piece rims that replace standard 5 piece rims. Works on both front and back of wheel without dismounting wheel from vehicle. Works on all new 3 piece 25” wheels or larger. Works on all wheels with CAT “Shur-Lok” safety feature. A MUST tool for all tire trucks. Patent Pending |
|
|
|
10109 |
Talon Bead Breaker, 3 Peice Rim w/Large Flange |
$1,160.00 |
|
| |
|
|
|
|
10607 - Caterpillar Shur-Lok Rim Kit |
| For use on vehicles with modified Shur-Lok rims. Allows bead breaker to be tightened against a flat surface. Fits all style earth mover bead breakers. |
|
|
|
10607 |
Cataerpillar Shur-Lok Rim Kit |
$95.00 |
|
|
10615 - Conversion Kit for "Combi" Bead Breaker |
| Clamp will convert older bead breakers in order to fit new style wheels. Works on all brand of "Combi" bead breakers. |
|
|
|
10615 |
Conversion Kit |
$191.00 |
|
|
|
70160 - Manual Bead Breaker |
Loosens tire bead from rims using leverage. Excellent for working on tires without removing the wheel from tractors. Will handle 38" and 42", 14-ply farm tractor and backhoe tires with drop-center rims to small ATV and lawnmower tires. Operates with ratchet wrench.
Do NOT use an impact wrench |
|
|
|
70160 |
Manual Bead Breaker |
$145.00 |
|
|
90100 - Adjustable Locking Tire Sling |
| Fast and easy way to handle tires in the horizontal position. Endless chain and locking device allows operator to position the tire as desired. Tire can be locked in any position. For tire sizes up to 39". 6,500 lb capacity. |
|
|
|
90100 |
Tire Sling |
$820.00 |
|
|
90200 - 2-Way Bar Push Tool and Giant Tire Inflation Cage |
| Works from the end of the truck boom and is used to depress or push back the bead and flange ring for fast and easy mounting and demounting of OTR/earth mover tires. Standard unit fits 25" through 45" rims. Meets OSHA requirements and acts as a tire inflation cage when left in position during the inflation of earth mover tires. |
|
|
|
90200 |
2 Way Bar Pushing Unit to 39" |
$510.00 |
|
|
90300 - Flange Ring Puller |
| Designed to lift the rim base from the tire, remove the bead seat band from the tire, or aid in the seating of the bead seat band during inflation. Features 4-point chain hook assembly. Easily attached to the boom. 21,600 lb capacity per chain. |
|
|
|
90300 |
Flange Ring Puller |
$418.00 |
|
|
90350 - OTR Flange Ring Clamp |
| Use crane to lift heavy side flanges on earth mover wheels with ease and precision. No more heavy, manual lifting. Works on all wheels 24" through 63" in diameter. Weight capacity 2000 lbs. No hooks needed. 2 clamps can be used 180° apart with chain between them to pull flange out against the bead seat band to seal the o-ring. |
|
|
|
90350 |
Rim Flange Clamp |
$155.00 |
|