|
|
40121 - King Pin Cap Removal Tool |
| Removes King Pin Caps on Mack Trucks with ease. Clears threads on axle casting. Impact rated (removal tool only; thread chasers cannot be used with impact wrench). Greatly improves the removal and installation of the thrust bearing adjustment screws on 10,500 lb., 12,000 lb. and 20,000 lb. axles. Kit includes large and small thread chasers for clearing the cap threads on the axle casting. |
|
|
|
40121 |
King Pin Complete Removal Tool ( Removal Tools & Thread Chasers) |
$210.00 |
Add
|
|
40320 - Bushing / Seal Tool Kit |
| Used for removal and installation of Brake Camshaft Bushings and seals, brake anchor pin bushings, front/steer axle king pin bushings. Kit contains 4 cylinders and 8 washers designed to fit most popular sizes of bushings and seals. Works on all brake manufacturers' systems: Eaton; Rockwell; Spicer; Dana; Standard Forge, etc. Quick and easy to use. Eliminates damage to parts during installation. |
|
|
|
40320 |
Complete Brake Buhing/Seal Tool Kit |
$90.00 |
|
|
60203 - Folding Tire Step |
| Heavy duty, portable safety step. Easy way to service truck engine compartments. Holds up to 400 lbs. Folds for compact storage (less than 4"). Galvanized heavy duty steel construction. |
|
|
|
60203 |
Tire Step, Folding, 22.5"-24.5" |
$85.00 |
|
60202 |
Tire Step, Super Single |
$140.00 |
|
|
60300 - Hendrix™ BUDD Nut Wrench |
| Safer, faster, less damaging to the wheel. Eliminates the need for hand and foot aid in separating the nuts; therefore reducing injury. Reduces the work and potential for back strain because there is no need to lay down the tire. Won't lose its grip on the outer cap nut so there is no loss of torque, which will give the impact wrench maximum power and efficiency. Won't slip or rotate out of position, significantly reducing the potential for damage to chrome and aluminum wheels. |
|
|
|
60300 |
BUDD Nut Wrench - Deluxe |
$124.00 |
|
|
60301 - 60303 - BUDD Nut Wrench |
| Pork Chop style - new design; can't slip out rim hole. Won't damage aluminum wheels. Holds outer cap nut securely. This new adaptation of an old product solves the problem of damage to wheels as well as broken toes and injuries to the feet. All models have a replaceable polymer-covered tail that locks the tool securely in place. Replacement tail available: model 60908. |
|
|
|
60301 |
BUDD Nut Wrench, 1 1/2" and 38mm |
$11.00 |
|
60302 |
BUDD Nut Wrench, 35mm |
$11.00 |
|
60303 |
BUDD Nut Wrench, 41mm |
$11.00 |
|
|
60500 - 60509 - "Tork-It" Truck Wheel Nut Torque Sticks |
Fast, accurate and inexpensive way to torque truck wheel nuts. Available from 175 ft/lbs. to 650 ft/lbs. Available in 3/4" and 1" drive. Customer uses existing sockets. Torque while tightening. See price sheet for sizes.Available sizes:
60500: 3/4" drive - 475 ft/lbs.
60501:3/4" drive - 475 ft/lbs.
60502: 3/4" drive - 175 ft/lbs.
60503: 1" drive - 475 ft/lbs.
60504: 1" drive - 250 ft/lbs.
60505: 1" drive - 350 ft/lbs.
60506: 1" drive - 175 ft/lbs.
60507: 3/4" drive - 350 ft/lbs.
60508: 1" drive - 650 ft/lbs.
60509: 1" drive - 550 ft/lbs. |
|
|
|
60500 |
Tork-It Stick, H/D, 3/4" drive - 475 ft/lbs. |
$110.00 |
|
60501 |
Tork-It Stick, H/D, 3/4" drive - 475 ft/lbs. |
$110.00 |
|
60502 |
Tork-It Stick, H/D, 3/4" drive - 175 ft/lbs. |
$110.00 |
|
60503 |
Tork-It Stick, H/D, 1" drive - 475 ft/lbs. |
$110.00 |
|
60504 |
Tork-It Stick, H/D, 1" drive - 250 ft/lbs. |
$110.00 |
|
60505 |
Tork-It Stick, H/D, 1" drive - 350 ft/lbs. |
$110.00 |
|
60506 |
Tork-It Stick, H/D, 1" drive - 175 ft/lbs |
$110.00 |
|
60507 |
Tork-It Stick, H/D, 3/4" drive - 350 ft/lbs. |
$110.00 |
|
60508 |
Tork-It Stick, H/D, 1" drive - 650 ft/lbs. |
$110.00 |
Add
|
60509 |
Tork-It Stick, H/D, 1" drive - 550 ft/lbs. |
$110.00 |
|
|
60917 - Truck Tire / Wheel Work Station |
Back by popular demand! You have all the tools; now put them in one place for easy access and movement to the work area. Reduce tire/wheel changing time by 60%. Serviceman has everything he needs at service site. No more back and forth to the shop or truck for tool or wheel parts. No more heavy air tool lifting. Air tool is virtually weightless when suspended from tool balanced. Eliminate back problems from extended air tool use. All OSHA warnings are clear and easy to understand. All wheel torque information on cart for ready access. Eliminates theft of impact tools. Can be carried on service trucks with power left gates.
*Cart & Balancer Only. Image shown with accessories
|
|
|
|
60917 |
Truck Work Station |
$650.00 |
|
|
60919 - Tool Balancer |
| Replacement tool balancer for Model 60917. Ideal for all tools 18 lbs. to 24 lbs. Balancer has 50% overload capacity. |
|
|
|
60919 |
Balancer |
$136.00 |
|
|
70130 - Truck Wheel Dolly |
| Reduce back injuries in shop. Tire/wheel is rotated left or right on tiltable roller pads for perfect stud alignment. Perfect for 8-10 hole BUDD type wheels. Removes truck tires fast and easy. Increases productivity. Reduces manpower needs. Saves time and money and is maintenance free. Heavy duty tubular construction lifts 280 lbs. 3" casters/wheels roll the truck wheels for effortless removal or replacement. Works with 19.5" through 24.5" tires. |
|
|
|
70130 |
Truck Wheel Dolly |
$90.00 |
|
|
70132 - Super Single Wheel Dolly |
| Heavy duty wheel dolly designed specifically for super single and flotation tires. 14" wide rollers accommodate even the largest super single wheels. Lifting capacity of 450 lbs. |
|
|
|
70132 |
Super Single Wheel Dolly |
$145.00 |
|
|
70131 - High Rise Truck Wheel Dolly |
For removal and installation of single, dual and duplex tire/wheels/brake drums. Lifts, tilts, side shifts and rotates tire/wheel/brake drum assemblies. Side shifting for easy alignment of lug holes or brake drum. Heavy duty rollers on lifting arms aid in realignment of bolt pattern. Tilting lift arm when fully loaded for additional stability. Two 360° swivel casters with caster lock. high gear ratio brake winch for easy one-handed lifting operation.Specifications:
Load Capacity: 1000 lbs.
Overall Length: 46"
Overall Height: 63.56"
Overall Width: 43.19"
Side Shifting Adjustment: Right 3.5"; Left 3"
Minimum Support Leg Clearance: 6"
Overall Unit Height: 63.56"
Maximum Arm Tilt Angle: 28°
Minimum Arm Elevation: 2"
Width of Arm: 24.25"
Gross Weight: 352 lbs. |
|
|
|
70131 |
High Rise Truck Wheel Dolly |
$645.00 |
|